Primary number – Triton 9610 Operation Manual User Manual

Page 128

TRITON SYSTEMS, INC.

SECTION 5 - MANAGEMENT FUNCTIONS

OPERATION MANUAL - MODEL 9610

5-86

UNCTION

: PRIMARY NUMBER

ACTORY

EFAULT

: NONE

CCESS

NSTRUCTIONS

1.) Select TERMINAL CONFIGURATION from the

MANAGEMENT FUNCTIONS menu.

2.) Select SET TERMINAL PARAMETERS.
3.) Select TELEPHONE.
4.) Select the PRIMARY NUMBER option.

ESCRIPTION

The Cash Dispenser communicates to your host processor over a
dial up phone line. The phone number of the processor must be
entered before live transactions can be performed.

When this function is selected, the current phone number is dis-
played (if nothing appears on the screen, no number is set). Se-
lect CHANGE to blank the current entry, and then enter the de-
sired phone number. The phone number may be up to 30 digits
long. It can also contain a dialing prefix, such as a ‘9’ for an out-
side line, if necessary. If you need to pause after the prefix, place
a comma in the number for a two-second delay at that point. Press-
ing the key first, then the <0> key, followed by the ARROW> key will select the comma character. Make sure to en-
ter the long distance prefix ‘1’ if you are dialing an 800 number or a
toll long distance number. Do not enter dashes in the number.

RROR

ONDITIONS

The Cash Dispenser will not process transactions if the phone
number has not been entered or has been entered incorrectly. In
such cases error code “185 - Phone Number Not Configured”, will
be received.