Triton 9610 Operation Manual - Manual (Page 17)

TRITON SYSTEMS, INC. 1-7
SECTION 1 - INTRODUCTION OPERATION MANUAL - MODEL 9610
Receipt Printer Paper Low Option
This features allows the end user to determine whether or not the
terminal is allowed to continue processing transactions when the
receipt printer paper is low.
Quad-Port Module
The Quad-Port Module is a serial interface board that provides
four independently assignable and software configurable serial I/
O ports. These ports are RS-232C compliant interfaces that can
support baud rates through 33,600 baud.
The capabilities of the module are such that new Cash Dispenser
features that require serial interfaces can readily be supported.
The LED Sign is an example of an option that requires the Quad-
Port Module.
Memory Expansion Modules
To take advantage of the new graphics handling features of the
Cash Dispenser, the terminal must be equipped with at least one
Memory Expansion Module. Memory Expansion Modules are avail-
able with the following memory capacity:
1 Megabyte (Part Number 9600-0004)
2 Megabytes (Part Number 9600-0031)
4 Megabytes (Part Number 9600-0032)
Two Memory Expansion Modules can be installed in slots four and
five of the terminal’s Electronic Enclosure.
Jumper Settings
Memory Expansion Modules have jumpers that must be installed
in the right position to operate correctly. The Memory Expansion
Module installed in slot 4 of the card cage must have the jumpers
across pins 1 and 2 of J1 and J2. If a second Memory Expansion
Module is installed, it will be put in slot 5 of the card cage. The
jumpers on the second Module must be installed across pins 2
and 3 of J1 and J2.
Formatting a Memory Module
A Memory Expansion Module is formatted so that it is ready to
accept downloaded files from the Triton Connect Host Computer.
All Single-Cassette Cash Dispenser Memory Expansion Modules
are shipped from the factory formatted. If it becomes necessary to
format a Memory Expansion Module, it can be accomplished by
two methods.