Triton 9610 Operation Manual - Manual (Page 156)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS OPERATION MANUAL - MODEL 9610
5-114
F
UNCTION
: COMMUNICATION HEADER
F
ACTORY
D
EFAULT
: PROCESSOR-SPECIFIC
A CCESS I NSTRUCTIONS :
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Choose MORE.
3.) Select COMMUNICATION HEADER.
D ESCRIPTION :
The COMMUNICATION HEADER is an optional feature that is only
applicable to certain processors. When a specified processor re-
quires the use of the COMMUNICATIONS HEADER it must be
ENABLED and have the correct data in the header data field. The
COMMUNICATION HEADER data field consists of alphanumeric
characters.
To enter a digit 0-9, press the key that has that digit. To enter a
letter, first press the key, then press the key that has the
letter you want on it. The first press of the key will display the first
character above the number. Subsequent presses will display the
characters in sequence. When the character you want is displayed,
press the key to ‘lock in’ the character. If your
next character is a letter, you must press the key again.
E RROR C ONDITIONS :
Enabling the COMMUNICATION HEADER when using a proces-
sor that doesn’t use this feature will prevent any type of transac-
tion from completing. Disabling or having incorrect data in the
COMMUNICATION HEADER data field (if the feature is required)
will also prevent any type of transaction from processing.