Hired-Hand Mega-Cool rev 6-09 - Manual (Page 2)

Part No. 4801-5120 Rev. 6-09 Mega-Cool System Page 2
Limited Warranty
All products are warranted to be free from defects in material and
workmanship for a period of one year from the date of purchase if
installed and used in strict accordance with the installation
instructions. Liability is limited to the sale price of any products
proved to be defective or, at manufacturer’s option, to the
replacement of such products upon their return. No products are
to be returned to the manufacturer, until there is an inspection
and/or a return-goods authorization (RGA) number is issued.
All complaints should be directed first to the authorized distributor
who sold the product. If satisfaction is not obtained or the name of
the distributor is not known, write the manufacturer that appears
below, directed to the attention of Customer Service Manager.
This limited warranty is expressly in lieu of any and all
representations and warranties expressed or implied, including any
implied warranty of merchantability or fitness for a particular
purpose. The remedy set forth in this limited warranty shall be the
exclusive remedy available to any person. No person has authority
to bind the manufacturer to any representation or warranty other
than this limited warranty. The manufacturer shall not be liable for
any consequential damages resulting from the use of our products
or caused by any defect, failure or malfunction of our products.
(Some areas do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may
not apply to you.)
This warranty gives you specific legal rights and you may also
have other rights that vary from area to area.
Warrantor:
Hired-Hand Mfg., Inc.
PO Box 140
1751 County Road 68
Bremen, Alabama 35033
Phone 256-287-7000
Table of Contents
Section Page
Limited Warranty.......................................................................................... 2
Table of Contents.......................................................................................... 2
Tools Required.............................................................................................. 3
Purpose of Evaporative Cooling ................................................................... 3
Description of System................................................................................... 3
In-Line System Configuration Options......................................................... 3
In-Line System Configuration Options......................................................... 4
Sump Pump System Configuration Options ................................................. 5
Installation Cross-Section (Systems Up To 80 ft.)........................................ 6
Installation Cross-Section (Systems 10' to 120')........................................... 7
Framing......................................................................................................... 8
8" Pipe Support Brackets ............................................................................. 9
Install 8" (20.3 cm) PVC Pipe..................................................................... 10
Cut Pipe to Allow for Pads ......................................................................... 11
Install Bottom Flashing and Drip Rails....................................................... 12
Install Removable End Cap ........................................................................ 14
Install BackPlate ......................................................................................... 15
Install Spray Line Support Brackets ........................................................... 16
Install Spray Line........................................................................................ 17
Install Splash Guards .................................................................................. 18
Install Cool Pads & Front Covers ............................................................... 19
Assemble End Caps .................................................................................... 20
Install System End Caps ............................................................................. 21
Install In-Line Pump Platform .................................................................... 22
Install In-Line Pump and Assemble Supply Line ....................................... 23
Connect In-Line Pump to Spray Line ......................................................... 24
Add Ball Valve to End................................................................................ 25
Float Valve Tank Assembly........................................................................ 26
Mega-Cool 10'-120' Straight Span, Center-Mount In-Line Pump System.. 27
Mega-Cool 10'-80' Corner, End-Mount In-Line Pump System .................. 28
Mega-Cool 10'-120' Corner, Center-Mount In-Line Pump System ............ 29
Flush System – In-Line Pump (End Mount Systems up to 80 ft.) .............. 30
Mega-Cool 10'-80' Straight, End-Mount Sump Pump ................................ 32
Mega-Cool 10'-80' Straight, Center-Mount Sump Pump ............................ 35
Pump Wiring Diagrams .............................................................................. 38
Operation .................................................................................................... 39
Hired-Hand Mega-Cool Checklist .............................................................. 40
Cleaning Mega-Cool System ...................................................................... 40
Winterizing Mega-Cool System.................................................................. 40
Mega-Cool Replacement Parts.................................................................... 42