Yokogawa µR20000 - Manual (Page 25)

2-9
IM 04P01B01-17E
Using
the
Ethernet
Interface
(/C7
Option)
1
2
3
4
5
6
App
Index
8. Set the user name and then press the key.
Key operations
• Use the
key to select the digit for entering a character.
• Use the CHARACTER key to select the character type.
• Use the key to select the character you wish to enter.
User=
9. Set the password and then press the key in the same fashion as in step 8.
The setting complete screen appears.
Password=
Ethernet login
Setting complete
To register other users, press the key to return to step 6 and repeat steps 8, 8,
and 9.
Saving the Settings
1. Press the ESC key to return to the Basic= screen.
2. Press the key to select End and then press the key.
3. Press the key to select Store and then press the key.
The settings are activated, and the Operation mode screen appears.
Explanation
You can limit the users that can access the Setting/Measurement and Maintenance/Test
servers on the recorder via the Ethernet interface.
• Enabling/Disabling the Login Function
Set whether to use the login function.
• Registering Users
• User level
Select either of the user levels, administrator or user.
• Administrator
One administrator can be registered. An administrator has the authority to use all
Setting/Measurement server and Maintenance/Test server commands.
• User
Six users can be registered. A user has limited authority to use the commands. See
section 4.2.
• Selecting Whether to Register (On/Off) the User
If On is selected, set the user name and password.
• Setting the User Name
• Set the user name using up to 16 alphanumeric characters.
• The same user name can not be registered.
• Since the word “quit” is reserved as a command on the recorder, the user name
“quit” is not allowed.
• Setting the Password
Set the password using up to 4 alphanumeric characters and spaces.
2.5 Registering Users
* When the key, key, or CHARACTER key is pressed while holding down the SHIFT key, the operation
is reversed as when the respective key is pressed by itself.