Yokogawa µR20000 - Manual (Page 20)

2-4
IM 04P01B01-17E
IP Address, Subnet Mask, and Default Gateway
1. Press the key to select Ethernet and then press the key.
Basic=Ethernet
2. Press the key to select Local IP and then press the key.
Ethernet=Local IP
3. Set the IP address of the recorder and then press the key.
Key operations
• Use the
key to select the digit for entering a value.
• Use the key to select the value you wish to enter.
A=
4. Set the IP address of the subnet mask and then press the key in the same
fashion as in step 3.
M=
5. Set the IP address of the default gateway and then press the key in the same
fashion as in step 3.
The local IP setting complete screen appears.
G=
Ethernet address
Setting complete
6. Press the ESC key to return to the higher level menu. To save the settings and
exit from Basic Setting mode, proceed to “Saving the Settings.”
DNS (Domain Name System)
1. Press the key to select Ethernet and then press the key.
Basic=Ethernet
2. Press the key to select DNS and then press the key.
Ethernet=DNS
3. Press the key to select On and then press the key.
DNS=On
4. Set the IP address of the primary DNS server and then press the key.
Key operations
• Use the
key to select the digit for entering a value.
• Use the key to select the value you wish to enter.
P=
5. Set the IP address of the secondary DNS server and then press the key in the
same fashion as in step 4.
S=
2.3 Configuring the Ethernet Interface
* When the key, key, or CHARACTER key is pressed while holding down the SHIFT key, the operation
is reversed as when the respective key is pressed by itself.