Yokogawa Button Operated MV2000 - Manual (Page 92)

4-18
4.4 Setting Commands (Setting)
IM MV1000-17E
If p2 is set to WEEK (day of week/time designation)
Syntax TK p1,p2,p3,p4,p5
p1 Timer number (1 to 4)
p2 Timer designation (WEEK)
p3 Designation of the day of the week (SUN,
MON, TUE, WED, THU, FRI, SAT)
p4 Time (hh:mm) (00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
If p2 is set to MONTH (day/time designation)
Syntax TK p1,p2,p3,p4,p5
p1 Timer number (1 to 4)
p2 Timer designation (MONTH)
p3 Day (1 to 28)
p4 Time (hh:mm) (00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
If p2 is set to YEAR (month/day/time designation)
Syntax TK p1,p2,p3,p4,p5,p6
p1 Timer number (1 to 4)
p2 Timer designation (YEAR)
p3 Month designation (JAN, FEB, MAR, APR,
MAY, JUN, JUL, AUG, SEP, OCT, NOV,
DEC)
p4 Day designation (1 to 31) The selectable
range varies on the specified month.
P5 Time (hh:mm) (00:00 to 23:59)
p6 Timer operation (SINGLE, REPEAT)
Example Specify 8:30 on April 28 every year for timer
number 3.
TK3,APR,28,08:30,REPEAT
Query TK[ p1]?
Example Specify hour 21 every Thursday for timer number
2.
TK2,WEEK,THU,21:00,REPEAT
TU Sets an event action
Syntax TU p1,p2,p3,p4,p5,p6,p7
p1 Logic number (1 to 40)
p2 Event type
NONE
REMOTE
Remote control
RELAY Alarm output relay
SWITCH Internal switch
ALARM Alarm occurrence
TIMER Timer expiry
MATCHTIMETIMER Match time expiry
USERKEY USER key
p3 Event detail
p2 =REMOTE Remote number (1 to
8)
p2 =RELAY Relay number
p2 =SWITCH Internal switch
number
p2 =TIMER Timer number (1 to 4)
p2 =MATCHTIMETIMER Match timer number
(1 to 4)
p2 =Other Space
p4 Action type
MEMORYSTART/STOP Start/stop sampling
MEMORYSTART
Start sampling
MEMORYSTOP Stop sampling
TRIGGER Event trigger
ALARMACK Alarm acknowledge
MATHSTART/STOP Start/stop computation
MATHSTART
Start computation
MATHSTOP Stop computation
MATHRESET Reset computation
SAVEDISPLAY Save display data to
an external storage
medium
SAVEEVENT Save event data to an
external storage medium
MESSAGE Write a message
SNAPSHOT Take a snapshot
MANUALSAMPLE Execute manual
sampling
TIMERRESET Reset the relative timer
DISPLAYRATE1/2 Switch the trend
interval
DISPLAYGROUPCHANGE Switch the display group
FLAG
Raise a flag
TIMEADJUST Synchronize the clock
PANELLOAD Load settings
p5 Event detail 2
p4 =TIMERRESET Timer number (1 to 4)
p4 =DISPLAYGROUPCHANGE Group number
p4 =FLAG Flag number (1 to 8)
p4 =MESSAGE Message number (1 to
100)
p4 =PANELLOAD Setup file number (1 to
3)
p6 Event detail 3
p4 =MESSAGE Method of specifying
the destination where
messages are written
ALL All display groups
SELECT A specified display
group
p7 Event detail 4
If p6 is set to SELECT Group number
Some p4 parameters (action type) are not
selectable depending on p2 (event type).
Some p4 parameters (action type) are not
selectable depending on the settings or on the
installation of options.
Query TU[ p1]?
Example Execute memory start with the remote control input
(terminal 1).
TUREMOTE,1,MEMORYSTART
Description Set parameter p3 (relay number, internal switch)
according to the table in section 4.3.
SK Sets a computation constant
Syntax SK p1,p2
p1 Constants number