Yokogawa Button Operated MV2000 - Manual (Page 60)

3-1
IM MV1000-17E
Using the Serial Interface
1
2
3
4
5
6
7
App
Index
3.1 Workflow for Using the Serial Interface
The flow chart below shows the procedure to set RS-232 or RS-422/RS-485
communication.
The procedure differs between RS-232 and RS-422/RS-485.
Set the address
RS-232
RS-422/485
Set the parity
Set the data length
Set the baud rate
Connect a cable
Set the handshaking
Communication type
Configure the
Modbus master
Set the protocol
Configuration required when the protocol
is set to Modbus master.
Start
End
Chapter 3 Using the Serial Interface