Yokogawa Button Operated MV2000 - Manual (Page 150)

5-31
IM MV1000-17E
Responses
1
2
3
4
5
6
7
App
Index
Configured Alarm Information Data
• The MV returns configured alarm information data in response to an FE6 command.
• The ID number of the output format is 26.
• You can use the CB command to specify whether to output the data of measurement
channels set to skip and computation channels set to OFF.
• The figure below indicates the format.
Number of blocks Block size
Configured alarm information block 1
...
Configured alarm information block n
(Reserved) (Reserved)
2 bytes 1 byte 1 byte 1 byte 1 byte
Version (Reserved)
2 bytes
Format Details
Item Description Output Value
Version Format version 1
Number of blocks * Number of configured alarm information blocks Up to 348
Block size * Size of the of configured alarm information blocks 24
Block 1 to n Configured alarm information blocks Up to 8352 bytes
See Block Details.
* Returned in the byte order specified by the BO command.
Block Details
Item Number of Bytes Notes
Channel number * 2 1 to 440
Decimal place 1 0 to 4
(Reserved) 1 0
Alarm type 4 The following settings are entered in order from
level 1 to 4.
0: Setting off, 1: H (high limit), 2: L (low limit),
3: h (difference high limit),4: l (difference low limit),
5: R (high limit on rate-of-change),
6: r (low limit on rate-of-change),
7: T (delay high limit), 8: t (delay low limit)
Alarm value * 4×4 The alarm values are entered in order from level 1
to 4.
* Returned in the byte order specified by the BO command.
Manually Sampled Data
• The MV returns the manually sampled data in response to the ME or MO command.
• The ID number of the output format is 17. See section 5.1 for details.
• For the data format, see the MV1000/MV2000 User’s Manual (IM MV1000-01E).
Report Data
• The MV returns the report data in response to the ME or MO command.
• The ID number of the output format is 18. See section 5.1 for details.
• For the data format, see the MV1000/MV2000 User’s Manual (IM MV1000-01E).
Display Data (Text)
• The MV returns the display data in response to an ME command.
• The ID number of the output format is 29. See section 5.1 for details.
• For the data format, see the MV1000/MV2000 User’s Manual (IM MV1000-01E).
Event Data (Text)
• The MV returns the display data in response to an ME command.
• The ID number of the output format is 30. See section 5.1 for details.
• For the data format, see the MV1000/MV2000 User’s Manual (IM MV1000-01E).
5.3 Binary Data Output Format