Yokogawa FieldMate - Manual (Page 77)

<8 TERMINATION>
8-1
IM 01R01A11-01EN
8 TERMINATION
This chapter describes “Normal Termination” and “Unexpected Termination”.
8.1 Normal Termination
Select “File”-“Exit” or click the “Close” button at the upper-right corner of “Main Screen”.
F080101.ai
Figure 8.1.1 Normal Termination
8.1.1 When the verification data has not been changed after
saving:
This tool is terminated without any dialogs appearing.
8.1.2 When the verification data has been changed after
saving:
1) Figure 8.1.2 is displayed.
1
2
F080102.ai
Figure 8.1.2 “Confirmation” Dialog
Table 8.1.1 “Confirmation” Dialog
Item
No.
Item Name Description
1 Yes Saves the verification data by over-writing. See 6.1.2.
2 No Cancels saving the data.
2) Select whether the latest verification data is saved to the database or not.
2)-1 To save the latest verification data:
Select “Yes (1)”. See 6.1.2.
2)-2 When the latest verification data is not saved:
Select “No (2)”. No dialogs appear and the data is not saved.
3) This Verification Tool is terminated automatically.