Yokogawa FieldMate - Manual (Page 29)

<5 LAUNCHING>
5-3
IM 01R01A11-01EN
2) “General Information” is displayed. See Figure 5.1.3.
Enter each field and click “Next (8)”. Figure 6.1.1 is displayed automatically.
1
2
3
4
5
6
7
8
F050103.ai
Figure 5.1.3 “General Information” Dialog
Table 5.1.2 “General Information” Dialog
Item
No.
Item Name Description
1 User Name (*)
Enter the user name.
The user name of FieldMate is displayed by default. This field can be
edited.
2 Location. (*) Enter the user location.
3 Verified by (*) Enter the name of the person to operate the verification.
4 Tag (Converter)
Enter the tag number of the converter. The value of HART parameter
“Tag” is displayed by default. This field can be edited.
Even if a different value is input from the HART parameter, the HART
parameter is not overwritten.
5 Tag (Flowtube) Enter the tag number of the flowtube.
6 Serial No. (Converter) Enter the serial number of the converter.
7 Serial No. (Flowtube) Enter the serial number of the flowtube.
8 Next
Moves to “Main Screen”. See Chapter 6.
Is enabled only after the mandatory fields have been filled in.
Click “Next” to move to “Main Screen”.
*: Mandatory field