Yokogawa FieldMate - Manual (Page 57)

<6 OPERATION>
6-25
IM 01R01A11-01EN
6.3.1 Current Output
This item checks the current output from the converter.
3
1 2
4
F060302.ai
Figure 6.3.2 “Current Output” Screen
Table 6.3.2 “Current Output” Screen
Item
No.
Item Name Description
1 Connection diagram Shows the connection diagram on another screen. See Figure 6.3.3.
2 Measured (mA) Enter the measured value manually.
3
Output (*1)
in Output Selection
Outputs the current.
By clicking “Output” after selecting each setting value, the preferred cur-
rent is transferred to AXF.
(Only when Verifi cation Tool is in “online” mode)
4
Exit
in Output Selection
Stops the current output and enables other operations.
(Only when Verifi cation Tool is in “online” mode)
*1: When the AXF protect function is set to “Protect”, Figure 3.2.2 is displayed after clicking “Output”. Follow 3.2.2.