Yokogawa FieldMate - Manual (Page 30)

<5 LAUNCHING>
5-4
IM 01R01A11-01EN
5.2 Loading Existing Verification Data
NOTE
In terms of keeping the integrity of the data, loaded verification data cannot be copied, nor can it
be saved under a different name. Loaded verification data can only be overwritten by new saved
data, except for “Locked data” which cannot be modified.
1) After the “Splash screen” is closed automatically, Figure 5.1.2 is displayed.
2) Click “Load (1)” in Figure 5.1.2. Figure 5.2.1 is displayed.
3) Select the preferred data from “Data list (1)” and click “OK (2)” in Figure 5.2.1.
1
2
3
F050201.ai
Figure 5.2.1 “Select Verification Data” Dialog
Table 5.2.1 “Select Verification Data” Dialog
Item
No.
Item Name Description
1 Data list
Shows the verification data in the database.
For the meaning of the icon in the “Data Status”, see Chapter 7.
2 OK
Loads the verification data.
To use the verification data in the database, select the preferred one
among “Data list” and click “OK”. Figure 5.2.2 is displayed.
3 Cancel
Creates new verification data and shows Figure 5.1.3. See 5.1.
To create the new verification data, click “Cancel”.
2) After loading, Figure 5.2.2 is displayed automatically. Click “OK”. “Main Screen” is dis-
played. See Chapter 6.
F050202.ai
Figure 5.2.2 “Verification Data Loaded” Dialog