Yokogawa FieldMate - Manual (Page 15)

<3 PREPARATION>
3-3
IM 01R01A11-01EN
3.2.2 During Verification
1) If the AXF write protect function is set to “Protect” during the verification, Figure 3.2.2 will be
displayed.
1
2
3
4
F030202.ai
Figure 3.2.2 “Write Protect Cancellation” Dialog
Table 3.2.1 “Write Protect Cancellation” Dialog
Item
No.
Item Name Description
1 ‘If hardware….’
Shows the figure of hardware switch. See Figure 3.2.1.
Click the text.
2 Enable Write
Cancels the software protection of the device.
Enter the password.
3 OK Runs the software protection cancellation.
4 Cancel Cancels ‘ Write Protect cancellation’
2) Set the “Write Protect Switch” to “Enable” .
Then, enter the password in (2) and click “OK (3)” in Figure 3.2.2.
3) Return the switch to the original position after this verification is complete.