Yokogawa FieldMate - Manual (Page 28)

<5 LAUNCHING>
5-2
IM 01R01A11-01EN
5.1 Creating New Verification Data
1) After the “Splash Screen”,
1)-1 When there is no existing verification data in the database:
The splash screen is closed automatically, and then Figure 5.1.3 is displayed.
1)-2 When there is existing verification data in the database:
1)-2-1 The splash screen is closed automatically, and then Figure 5.1.2 is displayed.
1
2
F050102.ai
Figure 5.1.2 “Confirmation” Dialog
Table 5.1.1 “Confirmation” Dialog
Item
No.
Item Name Description
1 Load
Loads the verification data from the database. See 5.2.
To load the verification data, click “Load”.
2 Cancel
Creates new verification data and shows Figure 5.1.3.
To create new verification data, click “Cancel”.
1)-2-2 Click “Cancel (2)”.
If “Load (1)” is selected by accident, Figure 5.2.1 is displayed. Click “Cancel (3)” in
Figure 5.2.1.