Yokogawa FieldMate - Manual (Page 50)

<6 OPERATION>
6-18
IM 01R01A11-01EN
(B) Flow (The fluid velocity is sufficient)
1) Fill the flowtube with fluid. Be sure that the fluid velocity is sufficient.
2
3
1
F060207.ai
Figure 6.2.7 “Flow/ No Flow” Screen
Table 6.2.6 “Flow/ No Flow” Screen
Item
No.
Item Name Description
1 Flow Selects the “Flow” test condition.
2 Start Verification (*1)
Runs “Circuit” check and “Device Status” check.
Those checks are performed automatically. The progress bar is displayed
at the bottom left.
3 Cancel Stops running “Circuit” check and “Device Status” check.
*1: When the AXF protect function is set to “Protect”, Figure 3.2.2 is displayed. Follow 3.2.2.
2) Select “Flow (1)” and click “Start Verification (2)”.
3) Before running “Circuit” check and “Device Status” check,
Figure 6.2.8 is displayed auto-
matically.