Yokogawa FieldMate - Manual (Page 51)

<6 OPERATION>
6-19
IM 01R01A11-01EN
1
2
F060208.ai
Figure 6.2.8 “Flow Confirmation” Dialog
Table 6.2.7 “Flow Confirmation” Dialog
Item
No.
Item Name Description
1 OK Runs “Circuit” check and “Device Status” check.
2 Cancel
Stops running “Circuit” check and “Device Status” check, and displays
“Main Screen”.
4) Click “OK (1)” after confirming that the flowtube is filled with fluid and the fluid velocity is suf-
ficient. “Circuit” check and “Device Status” check are run. During these checks, the status
bar and remaining time are displayed. See Figure 6.2.9. Regarding the execution time, see
Table 6.2.8.
F060209.ai
Figure 6.2.9 “During ”Circuit” Check and “Device Status” Check” Screen
Table 6.2.8 Execution time [Flow]
No. Optional code Execution time
1 Without ELC 630 s
2 With ELC (DC Noise Cut Circuit) 120 s