From “segment viewer, Axf is reading in “online” mode in fieldmate) -2 – Yokogawa FieldMate User Manual

Page 18

<4 START-UP FROM FieldMate>

4-2

IM 01R01A11-01EN

4.1

From “Segment Viewer” (AXF is reading in

“online” mode in FieldMate)

NOTE

Set the device address to 0. Verification Tool can be started only when the device address is set

to 0. For details on how to set the device address, refer to 9.2.

From “Segment Viewer”, “Verification Tool” can be started by either method (A) or (B).

(A) By right-clicking

Right-click on the target (AXF) icon displayed at “Segment Viewer”, and select “Verification Tool”.

F040102.ai

Figure 4.1.2 Start-up from “Segment Viewer” by Right-clicking