Watlow Series 96 - Manual (Page 51)

Active: Always 1707 r none -199.9 to 199.9
(-1999 to 1999) [hres] High Resolution
Displays high reso-
lution input value.
Active: Must be in [dIag] mode 1513 r/w [`OFF] (0) [`OFF] turn off the
cyclic display test (0)
[``on] turn on the
cyclic display test (1)
[DISP] Test Display
Test the indicator
lights on the front
panel.
Active: Must be in [dIag] mode 1514 r/w [none] (0) [none] none (0)
[out1] output 1 (1)
[out2] output 2 (2)
[out3] output 3 (3)
[out4] output 4 (4)
[`all] all outputs (5) [tout] Test Output
Turns on specific
output.
Active: Always 19 r (0) [none] none (0)
[reLy] relay (1)
[Proc] process (4)
[`485] (6)
[`232] (7) [OTY4] Output 4
Hardware
Read the output 4
hardware type.
Active: Always 18 r (0) [none] none (0)
[reLy] relay (1) [OTY3] Output 3
Hardware
Read the output 3
hardware type.
Active: Always 17 r (0) [none] none (0)
[reLy] relay (1)
[`Ssr] solid-state
relay (2)
[``dc] dc (3)
[Proc] process (4)
[OTY2] Output 2
Hardware
Read the output 2
hardware type.
Active: Always 16 r (0) [none] none (0)
[reLy] relay (1)
[`Ssr] solid-state
relay (2)
[``dc] dc (3)
[Proc] process (4)
[OTY1] Output 1
Hardware
Read the output 1
hardware type.
Active: Always 9 r (0) [nonE] none (0)
[PrEt] process event
(5)
[ItY2] Input 2 Hardware
Enabled
Read the input 2
hardware type.
Active: Always 4 r none 0.00 to 99.99 [`reu] Software Revision
Read software revi-
sion number.
Display Parameter Range Default Modbus Conditions for
(Modbus Value) Register Parameters to Appear
read/write
Wa t l o w S e r i e s 9 6 P a r a m e t e r s ■ 6 . 2 1
Factor
y Page / Diagnostics Menu
NOTE: For more information about how parameter settings affect the controller’s operation, see Chapter Five, Features.