Watlow Series 96 - Manual (Page 50)

Active: Always 3 r none 0 to 9999 [Soft] Software ID Num-
ber
Read the software ID
number.
Active: Always 2 r none 0 to 9999 [`Sn2] Serial Number 2
Read the last four
digits of the serial
number.
Active: Always 1 r none 0 to 9999 [`Sn1] Serial Number 1
Read the first four
digits of the serial
number.
Active: Always 5 r none 0196 to 9999 [dAtE] Date of Manufac-
ture
Displays date as
WEEK:YEAR
(WWYY).
Active: Always 0 r 96 96 [MdL] Model Number
Read the model
number of the con-
troller.
[dIag] Diagnostics Menu Enter [dIag] mode (1789) 1512 w
[Fcty] Factory Page
Active if ramping version of the
controller is selected
(96__-____-AA__).
1314 r/w [chng] (1) [hide] hide (0)
[chng] change (1)
[read] read only (2) [prog] Program Menu
Lock*
The lockout menu
will allow the user
to set different levels
of user lockout for he
program menu.
Active: Always 1305 r/w [chng] (1) [hide] hide (0)
[chng] change (1)
[read] read only (2) [`Cal] Calibration Menu
Lock
Set the calibration
menus lockout level.
Active: Always 1302 r/w [chng] (1) [hide] hide (0)
[chng] change (1)
[read] read only (2) [`Set] Setup Page Lock
Set the Setup Page
lockout level.
NOTE: For more information about how parameter settings affect the controller’s operation, see Chapter Five, Features.
6 . 2 0 ■ P a r a m e t e r s Wa t l o w S e r i e s 9 6
Factor
y Page / Diagnostics Menu
Display Parameter Range Default Modbus Conditions for
(Modbus Value) Register Parameters to Appear
read/write