Step 8 operate the controller, Summary of key functions in operation mode, Startup – Watlow MINICHEF Deep Fat Fryer Application User Manual
Page 72: Initial preheat, Preheat, Idle, 100f, Ready, Pre-`] [`heat, 50`f

7 0
■
Wa t l o w M i n i C h e f 2 0 0 0
A p p l i c a t i o n 1 6
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key
Function
A
Menu 1
B
Menu 2
C
Menu 3
D
Menu 4
E
Menu 5
F
Menu 6
Startup
Apply power to the fryer and add cooking oil if necessary.
Initial Preheat
At power-up, the unit will preheat to the temperature value set in the Configuration
Mode [Etype] / [preHt]. The display will show [prE-`] [`Heat] followed by oil
temperature as the oil heats up.
When the unit reaches initial preheat temperature, [ready] will flash once on the dis-
play and an audible tone will sound for 2 seconds. Then [`idle] will appear on the dis-
play. If the Real-time Clock option is installed and [SEtUp] / [Cloc`] is set to
[``yes], the time of day will appear on the display.
If the preheat condition is met before power-up, the controller goes directly to idle, and
does not display [rEAdy] or sound an audible tone.
Preheat
If in the Configuration Mode [SEtUP] / [ready] has been set to yes, the controller will
detect temperatures and preheat to operating temperature (above relative set point
minus the ready band) as required.
•
Activate the menu by pressing the menu key.
If the fryer is not at operating temperature, it will preheat. Meanwhile:
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[idle`]
Edit
Accept
Back-Up
Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D
E
C
F
M
INI
C
HEF
2000
[100f`]
Edit
Accept
Back-Up
Exit
B
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
G
H
G
H
A
A
[pre-`] [`Heat]
D
E
C
F
M
INI
C
HEF
2000
[`50`f]
Edit
Accept
Back-Up
Exit
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
A
B
G
H
A
B
G
H
D
E
C
F
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
A
B
G
H