Watlow MINICHEF Deep Fat Fryer Application - Manual (Page 42)

4 0 ■ Wa t l o w M I N I C H E F 2 0 0 0 A p p l i c a t i o n 1 3
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key Function
A Menu 1
B Menu 2
C Menu 3
D Menu 4
E Menu 5
F Menu 6
Startup
1. Apply power to the fryer and add cooking oil if necessary.
Initial Preheat
At power-up, the unit will preheat to the temperature value set in the Configuration
Mode [Etype] / [preHt]. The display will show [Pre-`] [`HEat] followed by oil tem-
perature as the oil heats.
When the unit reaches initial preheat temperature, [Ready] will flash once on the dis-
play and an audible tone will sound for 2 seconds. Then [`idle] will appear on the
display. (If Real Time Clock option is installed and [setUp] / [Cloc`] is set to
[``yes], the time of day will appear on the display).
Preheat
If in the Configuration Mode [SEtUP] / [ready] has been set to yes, the controller will
detect temperatures and preheat to operating temperature (above relative set point
minus the ready band) as required.
• Activate the menu by pressing the Start/Stop key.
If the fryer is not at operating temperature, it will preheat. Meanwhile:
The word [Pre-`] [`Heat] will appear on the display for a few moments. The
Start/Stop key indicator light will flash slowly. The temperature of Channel 1 will
be displayed until the operating temperature is reached.
A B
D E
C
F
G H
M INI C HEF 2000
[`idle]
Edit Accept
Back-Up Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D E
C
F
M INI C HEF 2000
[100f`]
Edit Accept
Back-Up Exit
B
D E
C
F
M INI C HEF 2000
[ready]
Edit Accept
Back-Up Exit
G H G H
A A
[pre-`] [`Heat]
D E
C
F
M INI C HEF 2000
[`50`f]
Edit Accept
Back-Up Exit
D E
C
F
M INI C HEF 2000
[ready]
Edit Accept
Back-Up Exit
A B
G H
A B
G H
D E
C
F
M INI C HEF 2000
[`idle]
Edit Accept
Back-Up Exit
A B
G H