IEI Integration NANO-QM871 - Manual (Page 84)

NANO-QM871 EPIC SBC
Page 69
Figure 4-19: USB Connector
4.9.4 VGA Monitor Connection
The NANO-QM871 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the NANO-QM871, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
NANO-QM871. See Figure 4-20.