Figure b-22: auto recovery utility, Figure b-23: disable automatically restart – IEI Integration NANO-QM871 User Manual

Page 169

NANO-QM871 EPIC SBC

Page 154

Step 1:

Follow the steps described in Section B.2.1 ~ Section B.2.3 to setup BIOS,

create partitions and install operating system.

Step 2:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Figure B-22: Auto Recovery Utility

Step 3:

Disable the automatically restart function before creating the factory

default image. Go to: My Computer

Properties

Advanced. Click the

Settings button of Startup and Recovery. Deselect “Automatically restart”. Click

OK to save the settings and exit. (See Figure B-23)

Figure B-23: Disable Automatically Restart