IEI Integration IMBA-C604EP - Manual (Page 119)

IMBA-C604EP ATX Server Board
Page 103
5.5.3 BMC Network Configuration
Use the BMC Network Configuration menu (BIOS Menu 26) to configure the BMC
network parameters.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Server Mgmt
BMC network configuration
Lan channel 1
Configuration Address source [Unspecified]
Station IP address -
Subnet mask -
Station MAC address -
Router IP address -
Router MAC address -
Lan channel 2
Configuration Address source [Unspecified]
Station IP address -
Subnet mask -
Station MAC address -
Router IP address -
Router MAC address -
Select to configure LAN
channel parameters
statically or
dynamically (by BIOS or
BMC). Unspecified option
will not modify any BMC
network parameters
during BIOS phase
---------------------
ÆÅ: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 26: BMC Network Configuration
Î Configuration Address Source [Unspecified]
Use the Configuration Address Source option to select the BMC network address source.
Î
Unspecified D EFAULT Does not modify any BMC network parameters
during BIOS phase
Î
Static Manually sets the BMC network parameters.
If this option is selected, the following items will
be configurable:
*Station IP address
*Subnet mask
*Station MAC address
*Router IP address
*Router MAC address