IEI Integration KINO-AQ670 - Manual (Page 91)

KINO-AQ670
P a g e 77

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2F8h;
IRQ=3
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3

IO=3F8h;
IRQ=3, 4
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ3, 4

IO=2F8h;
IRQ=3, 4
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3, 4

IO=2C0h;
IRQ=3, 4
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ3, 4

IO=2C8h;
IRQ=3, 4
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ3, 4
5.3.7.2 P o we r S a vin g Fu n c tio n
 Po wer Savin g Fu n ctio n [Dis ab led ]
Use the Power Saving Function option to enable or disable the power saving function.
When enabled, the system can only be powered-up using the power button.

Disabled D EFAULT Disable the power saving function.

Enabled Enable the power saving function.
5.3.8 H/W Mo n ito r
The H/W Monitor menu (BIOS Menu 12) shows the operating temperature, fan speeds
and system voltages.