IEI Integration KINO-AQ670 - Manual (Page 53)

KINO-AQ670
P a g e 39
4.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the installation of the
KINO-AQ670 may result in permanent damage to the KINO-AQ670
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the KINO-AQ670. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the KINO-AQ670 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the KINO-AQ670, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
KINO-AQ670.
 Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.