IEI Integration KINO-AQ670 - Manual (Page 105)

KINO-AQ670
P a g e 91

Disabled The onboard PCIe LAN controller is disabled

Enabled D EFAULT The onboard PCIe LAN controller is enabled
 PCIe LAN P XE Bo o t [Dis a b led ]
Use the PCIe LAN PXE Boot option to enable or disable the boot option for the PCIe LAN
PXE.

Disabled D EFAULT Disables PCIe LAN PXE Boot option

Enabled Enables PCIe LAN PXE Boot option
 PCIe USB3.0 Co n tro lle r [En ab led ]
Use the PCIe USB3.0 Controller option to enable or disable the PCI Express USB 3.0
controller.

Disabled Disables the PCI Express USB 3.0 controller

Enabled D EFAULT Enables the PCI Express USB 3.0 controller
 PCIe x8 Slo t (PCIe x1) [En ab led ]
Use the PCIe x8 Slot1 (PCIe x1) option to enable or disable the PCI Express x8 Slot1.
This slot supports x1 mode only.

Disabled Disables the PCIe x8 Slot

Enabled D EFAULT Enables the PCIe x8 Slot
5.4.3 In te g ra te d Gra p h ic s
Use the Integrated Graphics menu (BIOS Menu 20) to configure the video device
connected to the system.