beautypg.com

Removing the display module – ZOLL Propaq MD Rev A User Manual

Page 72

background image

C

HAPTER

3

D

ISASSEMBLY

P

ROCEDURES

68

9650-0807-01 Rev. A

Removing the Display Module

Tools Required

#1 Phillips screwdriver with torque capability

3M copper adhesive tape

6mm socket wrench

Setup

This procedure should be conducted on a static mat.

Wear a wrist strap to ground during the procedure.

Complete these procedures in the following order before performing this procedure:

1.

“Disassembling the Main Unit” on page 63

2.

“Removing the Front Enclosure Module” on page 66

To reinstall the display module, reverse the steps.

Display Disassembly

1

Place the back of the unit down on the mat
so that the display screen is facing up.

2

Remove the six (6) screws from the front of
the casting in the areas illustrated.

Note: During reassembly, torque screws to
6 in-lbs.

3

Flip the unit over and remove the
grounding screw for EtCO

2

in the area

illustrated.