beautypg.com

Removing the printer module – ZOLL Propaq MD Rev A User Manual

Page 66

background image

C

HAPTER

3

D

ISASSEMBLY

P

ROCEDURES

62

9650-0807-01 Rev. A

Removing the Printer Module

Tools Required

#1 Phillips screwdriver with torque capability

Setup

This procedure should be conducted on a static mat.

Wear a wrist strap to ground during the procedure.

To reinstall the printer module, reverse the steps.

Printer Disassembly

1

Place the unit on the mat in a horizontal
position.

2

Open the printer housing and remove the
printer paper.

3

Place the unit screen down and remove the
three (3) screws outside the printer module
in the illustrated areas.

Note: During reassembly, torque screws to
6 in-lbs
.

4

Slowly slide the printer from the unit, being
careful not to strain the cables.

5

Disconnect the two (2) cable connectors
from the printer module.

connectors