beautypg.com

Removing the front enclosure module – ZOLL Propaq MD Rev A User Manual

Page 70

background image

C

HAPTER

3

D

ISASSEMBLY

P

ROCEDURES

66

9650-0807-01 Rev. A

Removing the Front Enclosure Module

Tools Required

#2 Phillips screwdriver with torque capability

Wooden stick

Setup

This procedure should be conducted on a static mat.

Wear a wrist strap to ground during the procedure.

Complete these procedures in the following order before performing this procedure:

1.

“Removing the Handle” on page 61

2.

“Removing the Printer Module” on page 62

To reinstall the front enclosure module, reverse the steps.

Front Enclosure Disassembly

1

Remove tape from the top of the unit.

2

Separate monitor front enclosure.

3

Pivot top up with cables still connected.

4

Remove grounding screw as shown in the
illustration.

Note: During reassembly, torque screw to 6
in-lbs.

grounding
screw