Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 99)

83
CATC M ERLIN ’ S W AND 2.00 C HAPTER 8
User’s Manual Using Merlin to Record Merlin’s Wand Traffic
Enter the Link Key for the master-slave connection in the Link Key
text box.
Step 4
Press the Set button to apply the encryption setup.
8.8 Start a Merlin Recording Session
To begin a Merlin Bluetooth Analyzer recording session, press the Record
button on the Merlin toolbar.
8.9 Stop a Merlin Recording Session
To stop a Merlin Bluetooth Analyzer recording session, press the Stop
button on the Merlin toolbar.
8.10 Disconnect from Merlin Bluetooth Protocol
Analyzer
To disconnect from Merlin Bluetooth Protocol Analyzer, click on the
Connect/Disconnect
button.
Merlin's Wand will disconnect from Merlin.
8.11 Troubleshooting
“Server Busy” When Attempting to Launch Merlin
“Server Busy" message appears when attempting to launch Merlin on a remote
Windows 98 or Windows Me system.
• Make sure Merlin is running on the remote machine before clicking the
Connect/Disconnect Merlin button in Merlin’s Wand. Merlin’s
Wand cannot start or stop Merlin on a remote Windows 98 or Windows
Me system; it can only control Merlin once Merlin is running on the
remote machine.
• Make sure DCOM is properly installed and configured on the remote
machine, as described in the section DCOM Configuration for Windows
98/Me Systems.
• If the message box won't go away, close Merlin’s Wand (press
Ctrl+Alt+Delete and close the program directly or through the Task
Manager). Then, restart Merlin’s Wand and be sure to start Merlin on the
remote machine before retrying the operation.