Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 237)

221
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
RFOpenClientChannel()
RFOpenClientChannel(Address, ServerID)
Return value
The return value from RFOpenClientChannel is a list containing up to two
elements. The first element is the status of the command and is one of the
following strings:
• “Success”
• “Failure”
• “Timed out”
• “Not connected”
• “Restricted”
If the return value is “Success”, the second element in the list is the DLCI
of the established connection.
Comments
An ACL connection must already be established with the device.
Example
result = RFOpenClientChannel(Devices[0], 1);
if(result[0] == "Success")
{
Trace("Successfully connected with DLCI ", result[1],
"\n");
# Send some data over RFCOMM
}
RFRegisterServerChannel()
RFRegisterServerChannel()
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device
ServerID Service ID for
RFCOMM
channel
Parameter Meaning Default Value Comments
N/A