Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 121)

105
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
Write_Authentication_Enable
This command will write the value for the Authentication_Enable
parameter, which controls whether Merlin’s Wand will require
authentication for each connection with other Bluetooth devices.
Write_Class_of_Device
Write_Class_of_Device will write the value for the Class_of_Device
parameter, which is used to indicate its capabilities to other devices.
Command Parameters Examples Comments
Authentication_Enable 0x0 0x00=Authentication
disabled. Default
0x01=Authentication
enabled for all connection
Return Events
Write_Authentication_Enable_Complete
Write_Authentication_Enable_Error
Command Parameters Examples Comments
CoD 0x000000 Class of Device for the
device
Return Events
Write_Class_of_Device_Complete
Write_Class_of_Device_Error