Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 255)

239
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
L2CAPConfigurationResponse()
L2CAPConfigurationResponse(Reason)
Return value
• “Success”
• “Failure”
Comments
This command is used to automatically send the response to an incoming
configuration request. It should be executed before an incoming configura-
tion request.
Example
L2CAPConfigurationResponse("Reject-unknown options");
L2CAPConnectRequest()
L2CAPConnectRequest(Address, PSM, ReceiveMTU)
Parameter Meaning Default Value Comments
Reason Configuration
response
“Accept” Possible values:
“Accept”
“Reject-unknown options”
“Reject-unacceptable params”
“Reject”
TokenRate
TokenBucketSize
PeakBandWidth
Latency
DelayVariation
Parameter Meaning Default Value Comments
Address Bluetooth
address of the
remote device
PSM
ReceiveMTU 0x01C2