Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 242)

226
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
Comments
Example
status = RFAcceptChannel(1);
Trace("RFAcceptChannel returned: ", status, "\n\n");
RFAcceptPortSettings()
RFAcceptPortSettings(bAccept)
Return value
• “Success”
Comments
Example
status = RFAcceptPortSettings(0);
Trace("RFAcceptPortSettings returned: ", status, "\n\n");
RFCreditFlowEnabled()
RFCreditFlowEnabled(Address, DLCI)
Return value
• “Enabled”
• “Disabled”
• “Not Connected”
Parameter Meaning Default Value Comments
bAccept Boolean value
indicating
whether to
accept the
channel or not
0 0 or 1
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device
Can use “CONNECTED_DEVICE” to check if
credit flow is enabled on a master RFCOMM
connection. Note that this will work only if
exactly one device is connected via RFCOMM.
DLCI Data link con-
nection identi-
fier
The DLCI is returned by RFOpenClientChan-
nel()