Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 200)

184
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
HCIReadCountryCode()
HCIReadCountryCode()
Return values
Returns a list with two values: status and country code.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Country code (element 1) is the one-byte country code value. (0=North
America and Europe; 1=France.)
Comments
Reads the country code value. This value defines which range of frequency
band of the ISM 2.4-GHz band is used by the device.
Example
result = HCIReadCountryCode();
Trace("HCIReadCountryCode returned: ", result[0], "\n");
if (result[0] == "Success")
{
Trace("Country code is: 0x", result[1], "\n");
}
HCIReadCurrentIACLAP()
HCIReadCurrentIACLAP()
Return value
Returns a list with two values: status and Current IAC LAP.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Current IAC LAP (element 1) is the 3-byte value of the LAPs (Lower
Address Part) that make up the current IAC (Inquiry Access Code).
Parameter Meaning Default Value Comments
N/A
Parameter Meaning Default Value Comments
N/A