Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 253)

237
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
result = TCSSendInfoMessage("4088447081");
Trace("TCSSendInfoMessage result : ", result, "\n");
if( result != "Success")
return result;
Sleep(1000);
result = TCSDisconnectCall();
Trace("TCSDisconnectCall result : ", result, "\n");
if( result != "Success")
return result;
Sleep(1000);
Trace("HCI Disconnect result: ",
Disconnect(Device[0]), "\n");
}
C.8 L2CAP Commands
L2CAPConfigurationRequest()
L2CAPConfigurationSetup(FlushTimeout, ServiceType,
TokenRate, TokenBucketSize, PeakBandwidth, Latency,
DelayVariation)
Parameter Meaning Default Value Comments
FlushTimeout Amount of
time that the
sender will
attempt trans-
mission before
flushing the
packet
0xFFFF Time is in milliseconds.
ServiceType The required
level of ser-
vice
0x01 Possible values: 0x00 (no traffic), 0x01 (best
effort),0x02 (guaranteed), Other (reserved)
TokenRate The rate at
which traffic
credits are
granted
0x00000000 0x00000000: no token rate is specified.
0xFFFFFFFF: a wild card value that matches the
maximum token rate.
Rate is in bytes per second.
TokenBucket
Size
The size of the
token bucket
0x00000000 0x00000000: no token bucket is needed.
0xFFFFFFFF: a wild card value that matches the
maximum token bucket.
Size is in bytes.