Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 222)

206
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
Return value
• “Success”
• “Failure”
• “Invalid parameter”
Comments
Writes the number and values of the IAC LAPs to be used. One of the val-
ues has to be the General Inquiry Access Code, 0x9E8B33.
Example
result = HCIWriteCurrentIACLAP(2, 0x9E8B33, 0x9E8B34);
Trace("Result of HCIWriteCurrentIACLAP: ", result, "\n\n");
HCIWriteEncryptionMode()
HCIWriteEncryptionMode(EncryptionMode)
Return value
• “Success”
IACLAPs List of
IAC_LAPs,
each with a
value in the
range
0x9E8B00-0x
9E8B3F.
The number of values in this list must match the
NumCurrentIACs parameter.
Parameter Meaning Default Value Comments
Encryption
Mode
Encryption
mode:
0 = Encryp-
tion disabled;
1 = Encryp-
tion enabled
for
point-to-point
packets only;
2 = Encryp-
tion enabled
for both
point-to-point
and broadcast
packets;
3-255=Reserv
ed
0
Parameter Meaning Default Value Comments