Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 114)

98
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
Host_Buffer_Size
Used by the Merlin’s Wand to notify the Merlin’s Wand Host Controller
about its buffer sizes for ACL and SCO data. The Merlin’s Wand Host
Controller will segment the data to be transmitted from the Host Controller
to Merlin’s Wand, so that data contained in HCI Data Packets will not
exceed these sizes.
Read_Authentication_Enable
Read_Authentication_Enable will read the value for the
Authentication_Enable parameter, which controls whether Merlin’s Wand
will require authentication for each connection with other Bluetooth
devices.
Read_Class_of_Device
Read_Class_of_Device will read the value for the Class_of_Device
parameter for Merlin’s Wand, which is used to indicate its capabilities to
other devices.
Command Parameters Examples Comments
ACL_Data_Length 0x2A0 Only ACL is valid
SCO_Data_Length 0xFF The value of the
Host_SCO_Data_Packet_
Length must be > 399
Total_Num_ACL 10
Total_Num_SCO 0xFF
Return Events
Host_Buffer_Size_Complete
Host_Buffer_Size_Error
Command Parameters Examples Comments
N/A
Return Events
Read_Authentication_Enable_Complete
Read_Authentication_Enable_Error
Command Parameters Examples Comments
N/A