Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 134)

118
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
RegisterPsm
Registers a PSM identifier with L2CAP. Once registered, the protocol can
initiate connections and data transfers as well as receive connection requests
and data.
SendData
Sends data on the specified L2CAP channel.
A.4 Other L2CAP Events
Return Events
InfoRequest_Complete
InfoRequest_Failed
Command Parameters Examples Comments
PSM 0x1001
Receive MTU 0x1B6
Return Events
RegisterPsm_Complete
RegisterPsm_Failed
Command Parameters Examples Comments
CID 0x0040
Data Pipe “Pipe1” Data_Pipe should be
created in the Data Transfer
Manager.
Return Events
SendData_Complete
SendData_Failed
Events
Connection_Indication
Disconnection_Indication
Data_Indication
Write_Configuration_Complete
Command_Complete