3 emulating devices, Emulating devices – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 46
30
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
3
User’s Manual
Profile Wizard
If the connection attempt is successful, the Connection Status screen will
show that Merlin’s Wand has established a connection with the device.
Note
If you cannot establish a connection, you can re-attempt the connection by either
pressing Back and re-running the previous two steps, or by pressing the Connect
button on the Connection Status screen.
Step 4
Use an external application to send data to the remote device.
Note
A modem driver must be installed on the virtual COM port in order to use an
external application to send data through Merlin’s Wand. See “Install a Modem
Driver on the Virtual COM Port” on page 40 to find out how to install the driver.
Once the driver is installed, you must configure the external application to use that
driver.
Open the application and send the data. It will use the modem driver on
the virtual COM port to send the data to the Serial Port device through
Merlin’s Wand.
3.3 Emulating Devices
Choosing the “Emulate Device” option on the opening screen of Profile
Wizard allows you to configure Merlin’s Wand to emulate a Bluetooth
wireless device. This option causes Merlin’s Wand to act as a slave device.
Step 1
Open Profile Wizard and click the Emulate Device button.
The Select Profile screen will open.
Step 2
Select a profile from the list and click Next.
You will advance to the Configure Security screen.
Step 3
Select the security option that you would like to apply for the
device.
•
Do not apply authentication and encryption.
Authentication and encryption will not be used.
•
Apply authentication and encryption.
The default authentication and encryption settings will be used.
•
Use current authentication/encryption settings.
The authentication and encryption settings that are currently set in the
Local Device manager will be used.
•
Display the Local Device Manager so I can configure security and
verify PIN codes myself.
This option allows you to access the Local Device Manager to