Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 194)

178
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
HCIPINCodeRequestReply()
HCIPINCodeRequestReply(Address, PINCode)
Return value
• “Success”
• “Failure”
Comments
Specifies the PIN code to use for a connection.
Example
result = HCIPINCodeRequestReply('6C421742129F9', "New PIN
Code");
Trace("HCIPINCodeRequestReply returned: ", result, "\n");
HCIQoSSetup()
HCIQoSSetup(Address, ServiceType, TokenRate,
PeakBandwidth, Latency, DelayVariation)
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device for
which PIN
code will be
used.
PINCode PIN code to
use when con-
necting to the
device.
Must be 1 to 16 characters in length.
Parameter Meaning Default Value Comments
Address Bluetooth
address of the
remote
ServiceType The one-byte
service type:
0=No traffic;
1=Best effort;
2=Guaranteed
TokenRate The four-byte
token rate
value in bytes
per second