Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 142)

126
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
0x00 -- FLOW_CTRL_NONE
0x01 -- XON_ON_INPUT
0x02 -- XON_ON_OUTPUT
0x04 -- RTR_ON_INPUT
0x08 -- RTR_ON_OUTPUT
0x10 -- RTC_ON_INPUT
0x20 -- RTC_ON_OUTPUT
Xon:
Value: Default Xon char -- 0x11
• Xoff:
Value: Default Xoff char -- 0x13
RequestPortStatus
This command will request the status of the PortSettings for the remote
device.
SendData
Causes Merlin’s Wand to send data by pipe value to remote device over the
specified channel.
SendTest
This command causes Merlin’s Wand to sent a test frame to a remote device
over the specified channel.
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
Return Events
RequestPortStatus_Complete
RequestPortStatus_Error
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
Data Pipe Pipe1 Data Pipe should be created
in the Data Transfer
Manager
Return Events
SendData_Complete
SendData_Failed
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)