IAI America XSEL-S - Manual (Page 75)

Chapter 4
Appendix
69
IA Net
XSEL-R/S
4.2.3 Error Codes Related to IA Net
x Message Level Error
No. Error Name Contents / Counteractions
211 IA Net Link Error
IA Net Link Error was detected. Check if the stations indicated in I/O
Parameters No.605 and 606 are connected to IA Net properly, or if the
station numbers are duplicated in the IA Net network.
212 IA Net Break Station Detection Error
A station that cannot be joined in the IA Net communication cycle was
detected. Check if there is a controller or unit with the station number
greater than what is set in I/O Parameter No.604 “IA Net Final Station
No.”.
213
IA Net Mail Undefined Error Code
Receive Error
Undefined IA Net mail error code was received. There is a concern
that there is a function that is available in other controllers and units in
the IA Net network, but is not available on this controller. Update the
application in the main CPU board.
214 IA Net Stop Detection Error
Communication stop of IA Net was detected. Check if there is an IA
Net related error being occurred.
215
External Terminal Block Overcurrent
or Power Supply Failure
Overcurrent on external terminal block or an error in the power supply
to external terminal block.
216 DO Output Current Error There is a failure in DO output current.
217 24V I/O Power Supply Failure There is a failure in 24V I/O power supply.
x Operation Cancel Level Errors
No. Error Name Contents / Counteractions
491
IA Net Stop Detection Error at IAI
Protocol Transfer
IA Net is not working properly during the IAI protocol transfer in IA Net.
Confirm that the IA Net board is mounted in the appropriate way or the
IA Net is working properly.
492 IA Net IAI Protocol Mail Sending Error
IAI protocol communication failed in IA Net.
Check the condition of IA Net connection, communication station
number, I/O Parameters No.602 to 605, etc.