5 mount of connector box and others – IAI America LSA-S10SS User Manual
Page 44

2. Installation
38
2.3.5 Mount of Connector Box and Others
T-slots (M3) are provided on the side faces of the actuator for installation of a connector box or
other external equipment.
If you are using a wiring kit, install a connector box using these T-slots.
T-slots can also be used for other purposes, such as installing sensors or securing cables.
The T-slot dimensions are specified below.
• Use of square nuts is recommended in T-slots, but hex nuts can also be used.
• When installing an object using T-slots, select bolts of an appropriate length so that the tip of the
bolt will not contact the bottom of the T-slot.
1.8
5.5
2.7
5.8
3.3