Transportation, 1 handling a single axis – IAI America SSPA User Manual
Page 34
5. T
ransportation
26
Motor cover
5. Transportation
5.1 Handling a Single Axis
5.1.1
Handling the Packed Unit
Unless otherwise instructed, each actuator axis is packed individually and shipped.
x
Do not bump or drop the package. The package is not specially designed to withstand the impact of dropping
or bumping.
x
The operator should not carry heavy shipping boxes by himself. Transport the package using an appropriate
transport means.
x
If the shipping box is to be left standing or transported, it should be in a horizontal position. If the packing
specification is instructed, follow the instruction.
x
Do not climb on top of the shipping box.
x
Do not place heavy objects, or objects having a section where loads concentrate, on top of the shipping box.
5.1.2
Handling an Actuator after Unpacking
(1) ISB, ISPB
x
Do not transport the actuator by holding the cables or move it by pulling the cables.
x
When transporting the actuator, do so by holding the base.
x
Be careful not to bump the actuator during transport.
x
Do not exert an excessive force on any part of the actuator.
x
In the case of the high-precision straightness specification type, be careful not to make a damage and the
traces of hitting at the base bottom.
There is a possibility that the running accuracy changes.
(2) SSPA
x
Four eye bolts are installed, so use these eye bolts to transport the actuator. The SSPA, when unpacked, looks
like the condition shown in the figure below.
x
Do not hold the motor cover when transporting the SSPA. Doing so may damage the cover due to the weight
of the actuator or the main unit may fall.
x
Do not transport the actuator by holding the cable, or move it by pulling the cable.
x
Be careful not to bump the actuator against anything when transporting it.
x
Do not apply excessive force on any of the actuator parts.
x
In the case of the high-precision straightness specification type, be careful not to make a damage and the
traces of hitting at the base bottom.
There is a possibility that the running accuracy changes.
M8 eye bolt