IAI America SSPA - Manual (Page 30)

2. Specification
22
L [mm]
SXM 30
SXL 30
MXM 37.5
MXL 37.5
MXMX 37.5
LXM 44.5
LXL 44.5
LXMX 44.5
LXUWX 44.5
Caution: Make sure the load installed on the actuator is not longer than the allowable overhang load length
(L). If the load is longer than L, vibration may occur or the settling time may increase depending on
the position of center of gravity position or weight of the work part.
If a load moment exceeding the allowable load moment is applied, not only the life of the guide will
become shorter but vibration or longer settling time may also result.
L
Reference position
Reference position for
moment calculation