IAI America RCS2-A6R - Manual (Page 47)

4. Maintenance Inspection
41
4.6.2 How to Apply Grease
(1) When greasing the ball screw, apply grease using a finger and then move the slider back and
forth several times to let the grease spread evenly.
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
(2) When greasing the slider, apply grease directly on the bearing while the return cover is
removed from the guides.
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
(3) Install the side covers.
Tightening torque Thin-head screw M3×6� 87.2N • cm (8.90kgf�cm)
�
�
Caution: In case the grease got into your eye, immediately go see the doctor to get
appropriate care. After finishing the grease supply work, wash your hands
carefully with water and soap to rinse the grease off.
�
�
�
Return
Cover
Apply Grease