IAI America RCS2-A6R - Manual (Page 31)

2. Installation
25
2. Installation�
2.1 Transportation
[1] Handling of the Actuator
Unless otherwise specified, the actuator is shipped with 1 axis unit packaged separately.
(1) Handling the Packed Unit
� Do not damage or drop. The package is not applied with any special treatment that enables it to
resist an impact caused by a drop or crash.
� Transport a heavy package with at least more than two operators. Consider an appropriate
method for transportation.
� Keep the unit in horizontal orientation when placing it on the ground or transporting. Follow the
instruction if there is any for the packaging condition.
� Do not step or sit on the package.
� Do not put any load that may cause a deformation or breakage of the package.
(2) Handling the Actuator After Unpacking
� Do not carry the actuator by its motor unit or its cable or attempt to move it by pulling the cable.
� Hold the base part or bracket part of the body when transporting the actuator main body.
� Do not hit or drop the actuator during transportation.
� Do not attempt to force any part of the actuator.